Rapidograph

Tip: 0.18 mm

With our Rapidograph you can let your creativity run wild! The fine tip allows for precise work with great effects. The finished motif can be sealed as usual using the TOP HARD. The artistic result can be seen ...

Line thickness: 0.18 mm.

Color of the rapidograph: black.

Usage:

1. Pour the special ink into the reservoir in rapidograph. Maximum 1/2 tank.

2. Put a few drops of water into the small reservoir at the top of the cap. This will prevent the ink from drying out in the needle.

3. Mattify coloured UV Gel polish or gel with buffer block and clean it with NeoNail cleaner. Make a rapidograph pattern and then secure it with a Hard Top or a gel finish.

4. After finishing work, wash the rapidograph with water. To do so, unscrew the writing part of the rapidograph and place it in a warm water container for about 5-10 minutes. Finally rinse the part of the rapidograph under a stream of warm water.

5. When using a classic nail polish, create the pattern on the second day when nail polish will totally dry.

Warning!

Rapidograph should be cleaned daily after work is finished, because the dried ink can clog the needle. The rapid pressing of the rapidograph to the surface on which we create the pattern can lead to its permanent mechanical damage.

Rapidograph is not filled with ink (it should be purchased additionally).



HERE you will find the instructions for the application and cleaning of the Rapidograph.

Cleaning instructions:

After each application, empty the Rapidograph's refill and rinse with water. Caution: Dried ink may clog the tip. The tip can also become damaged by strong pressure on the surface.

Always paint on a frosted and defatted surface.

Clean Rapidograph daily after work.

We are not responsible for any damages resulting from incorrect use of the product.

Be careful not to contaminate the ends with lacquer, acrylic, gel.

Always paint on a frosted and defatted surface.

NeoNail - Moonlight Effect 01

You may also like